With the pipes
attached to the 24 inch x 24 inch plywood uprights using conduit
clamps and the plywood attached to the base sheet of plywood
with some angle irons we have one lau gar staff; seven eyebrow
height staffs, 2 spears, 2 shinai, three canes, one flail
(two section staff) and four half-staffs. That is a camera in
the lower left. There's a handle on the staff stand just visible
at the lower right. The pipecutter shown at the right is a very
handy tool if you are cutting 30 pieces of pipe. For one or two
- probably better off with a hacksaw and miter box. |